Sensorsoft Humidity / Temperature meter

Sensorsoft Humidity / Temperature meter
Brand: Sensorsoft
Product Code: SS6610J
Price: £125.00

Available Options


Conformal Coating:


Qty:     - OR -   Add to Wish List
Add to Compare

Measures relative humidity (0 and 100 % RH) and temperature (-40 C and +60 C, -40 F to +140 F) with improved resolution. Suited for monitoring rooms or warehouses. It has an RS232 RJ45 communications jack (J suffix) and 2.1 mm external power jack. Requires 200X modular cable (see Cables) and host software - not included.

User Manual

Performance
Range Temp: -40 ºC to +60 ºC (-40 ºF to +140 ºF) with internal sensor (NIST traceable if ordered with certificate). RH: 0 to 100 % RH (NIST Traceable)
Precision Temp: 0.5 ºC or 0.1 ºC, RH: 0.1 % RH and 1 % RH
Accuracy Temp: +/- 0.5 ºC over 0 ºC to +70 ºC, +/- 1 ºC over remainder of temperature range. RH: +/- 3 % RH between 10 % RH to 90 % RH and +/- 5 % RH below 10 % RH and above 90 % RH
Humidity Long Term: < 90% RH (non-condensing)
Max Measuring Rate one reading every second
Communication
Comms Connector 8 position modular jack, (accepts 8 position plug RJ45)
Communication Interface RS232 using TX,RX,RTS,DTR and GND. One device per serial port
Max Comms Cable Length 305 m (1000 ft.) using recommended cable type. Low capacitance shielded cable or UTP is recommended. Firmware Version: 5.24
Communications Protocol Sensorsoft Device Protocol (SSDP) Version 2.1
Error Control 16 bit CRC (cyclic redundancy checking) for detection of communication errors between this device and host
Power
Power Source Port-powered (RTS and or DTR asserted) or via External DC power connector
Power Supply Current Drain 1.5 mA average, 6 mA maximum when port powered (5V RS232)
External DC Power Connector 2.1 mm power jack, automatic polarity correction and over-voltage protection
External Power Supply Voltage 6.0 - 12.0 VDC
Powered By OpenCart
Waendel Technology Limited © 2018